What is the difference between diamond cutting discs and ordinary cutting discs

Diamond cutting discs mainly cut materials with higher hardness, and there are various bonding methods, but the abrasive must be diamond; ordinary resin cutting discs are generally used to cut metals with lower hardness, and the general abrasives are brown corundum, white corundum, silicon carbide …

Safety precautions for emery (diamond) circular saw blades:

Operators must wear protective equipment such as protective glasses, protective masks, work clothes, protective shoes, and gloves;

Fasten and install according to the rotation direction indicated by the saw blade, and do not work in reverse;

When dry cutting, do not cut continuously for a long time, so as not to affect the service life and cutting effect of the saw blade;

Do not forget to add water when using wet slicing (normal slicing requires water, and brazing slices can be used both wet and dry);

Please do not cut the curve, please use the special cutting blade for the arc to cut the curve;

It is forbidden to use cutting discs for grinding operations, please use special grinding discs for grinding;

When using the cutting blade for processing, make sure that the personnel deviate from the tangent direction of the cutting blade to prevent the flying piece of the cutting blade from hurting people.

Application scope of diamond cutting disc

Suitable for high-speed cutting of normal hardness stone,

Suitable for sporadic projects and mass users;

It is suitable for cutting medium hardness stone, ceramics, concrete, etc. It is efficient and has a wide range of applications, suitable for medium engineering and professional users;

It is suitable for high-speed cutting of medium and high hardness stone, with high cutting efficiency and good durability, suitable for large-scale projects and professional stone production.

Precautions for the use of diamond cutting discs

Before use: It should be confirmed whether the saw blade is worn or not. Do not use if worn.

When installing, pay attention to keep the direction of the arrow marked on the saw blade consistent with the direction of rotation of the tool used.

When cutting, please do not apply side pressure and curve cutting, and the feed should be stable.

When dry cutting, do not cut continuously for a long time, and the cutting machine should be cooled intermittently.

Wet slices are cut and should be cooled with water. Beware of leakage.

The cutting machine must have a safety cover, and the operator must wear safety clothing and eye protection.

Ordinary emery cutting disc Brazed emery cutting disc

Emery cutting discs, mainly cutting carbide and non-metallic (ceramic glass and the like) materials.