Cabezales de muelas abrasivas electrochapadas DimaondCBN
220303
hnkm_index_banner_01
bandera
0318

NUEVOS PRODUCTOS

  • Tiny Twist Drilling Bit

    Diamond drilling bit is electroplated diamond drilling bit, with twist grinding head, tiny head up to 2mm diameter. D231 diamond grit make it very sharp when drilling holes. It is widely used on all types of materials drilling, such as  ceramics, porcerlain, carbide, glass, gems, stones, quarz, marble, graphite, slicon carbide, aluminum, etc. All range of diamond particles can be applied to the steel matrix. from coarse grit D851 to fine grit D20 , all size diamond abrasives can be elect...

  • 600 Grit Diamond Curved Grinding Wheel

    Electroplated diamond grinding wheels with fine grit up to 800, can make the surface of the workpiece roughness value as low as 0.1. To make the workpiece achieving very smooth . EP diamond grinding wheels are widely used for gems, stones, carbide tools, ceramics, wood, cork, almost every type of materials.  Electroplated diamond grinding wheels can use very large diamond grit range, from  coarse grit 36# up to very fine grit like 1000#, or 2000#. Brazing diamond grinding wheels are...

  • Diamond Pellets Cube Diamond Grinding Stone

    Diamond grinding pellets can be made of resin bond diamond or metal bond diamonds, they can be designed to any shapes and any size based on customer's requirement. They can be used single or in a group,  glue diamond grinding pellets to a steel base plate to make it a grinding disc, which can be widely used on glass, ceramics, porcerlain, stones, floors, train tracks. This diamond pellets are made from metal bond diamond , with fine grit 200#, with really good life time and durabilit...

  • Grinding Wheel Dressing Abrasive Block/Stick, Round, Silicon Carbide

    This is a grinding wheel dressing, which is manufactured with premium silicone carbide abrasive material, durable and practical enough to use. This dressing is convenient to carry and can be used easily. It can dress of various materials, such as stainless steel, brass, stones, titanium, etc. - Made of high- quality silicon carbide abrasive, and durable. – Material: Silicon carbide abrasive. – Size: About 20.00X2.40X2.00cm/ 7.86X0.94X0.79in. – Effectively trims and trims a v...

  • Silicon Carbide Grinding Wheel for Aluminum, Titanium ,Copper Plishing

    Silicon carbide grinding wheel is one type of bonded grinding wheels. Due to different bond, there are also two types silicon carbide grinding wheels. They are ceramic or vitrified silicon carbide grinding wheels, resin bond silicon carbide grinding wheels. PVA is one types of resin bond, but it is special bond, which can make the grinding wheel more lighter, fluffy. So that the abrasive wheel is specially used for non-ferrous metals, like aluminum, titanium, copper, brass, etcs.  These ...

  • Diamond Coated Burr Mounted Point 1/4 Inch Shank

    This burr bit diameter is 20mm, the diameter of the rod is 6mm, which is suitable for flat knitting machines, bench drills, electric drills, etc. The concave emery grinding head is made of high-quality emery and processed by the overall precision turning (numerical control lathe); the concentricity is accurate, and there is no yaw phenomenon, so as to ensure the quality of the product and the use effect. The concave arc design diamond grinding bit is especially suitable for the arc grinding o...

  • Aluminum Oxide Grinding Wheel with Slots

    Bown aluminum oxide grinding wheel with 8 slots. Vitrified grinding wheel is used for knife sharpening, cast iron surface grinding. 8 slots are expecially good for chip removing. Grinding wheel size is 250mm, 9.8inches, with 1inch thickness and 32mm bore size.   Premium brown aluminum oxide abrasives with ceramic bond in a special formular to make the grinding wheel more durable, better heat dismission, better sharpening performance. Product Parameters: Product Name: abrasive grindi...

  • Green Plishing Wheel for Glass, Steel

    This polishing wheel is made from silicon carbide. with special resin bond to make the polishing wheel plastic . The polishing wheel is normally with fine grit from range of 200 grit to 2000 grit. The polishing wheel is widely used for glass slot polishing, metal slot polishing or edge polishing. The plastic plishing working area make it easy to polishing the hard to touch area to make the corner polishing thoroughly and easier. Product Parameters: Product Name: grinding wheel Grit:600# Mater...

PRODUCTOS DESTACADOS

Tormek 6 Inch Fine Grit 600 Diamond Wheel

Fine Grit 600 The Tormek  wheel is an fine 600 grit. This is a finishing wheel. Its combination of an extra fine finish with minimal material removal make it perfect for knives and carving tools. For those times when coarser abrasive is called for, please tell us, all range grits are availabe. Sharpen any Material Diamonds are the hardest abrasive available, and with them it is possible to sharpen not only steel, but ceramic and carbide as well. Now, sharpen even more with your Tormek. U...

Tiny Twist Drilling Bit

Diamond drilling bit is electroplated diamond drilling bit, with twist grinding head, tiny head up to 2mm diameter. D231 diamond grit make it very sharp when drilling holes. It is widely used on all types of materials drilling, such as  ceramics, porcerlain, carbide, glass, gems, stones, quarz, marble, graphite, slicon carbide, aluminum, etc. All range of diamond particles can be applied to the steel matrix. from coarse grit D851 to fine grit D20 , all size diamond abrasives can be elect...

Aluminum Oxide Grinding Wheel with Slots

Bown aluminum oxide grinding wheel with 8 slots. Vitrified grinding wheel is used for knife sharpening, cast iron surface grinding. 8 slots are expecially good for chip removing. Grinding wheel size is 250mm, 9.8inches, with 1inch thickness and 32mm bore size.   Premium brown aluminum oxide abrasives with ceramic bond in a special formular to make the grinding wheel more durable, better heat dismission, better sharpening performance. Product Parameters: Product Name: abrasive grindi...

Muela abrasiva de vidrio

Sobre el producto: Nombre: muela abrasiva de diamante, muela abrasiva de vidrio, Material metal unido, partículas de diamante Forma concentración plana 100% Grano 140/170# Diámetro de la rueda 200 mm 7,8 pulgadas Tamaño de la rosca del orificio 31,75 mm 1,25 pulgadas Espesor total 5 mm Capa de trabajo de diamante 10 mm Características cuerpo de acero fuerte metal de nivel superior unido con procesamiento de diamantes vida útil súper larga Aplicación vidrio, gemas, cerámica ...

Muela abrasiva de banco de carburo de silicio, muela abrasiva

Acerca del producto: Nombre: muela abrasiva, muela abrasiva de carburo de silicio Material abrasivos de carburo de silicio Unión vitrificada, cerámica Grano 60-120# Forma plana, muela recta Características buen autoafilado suave para muela abrasiva de diamante Aplicaciones muelas abrasivas de diamante abrasivo, carburo abrasivo, vidrio Tipo de molienda Especialidades en seco/húmedo y producción personalizada Como productor líder de abrasivos en China, podemos ofrecer...

Herramienta de diamante para esmerilado y pulido de ranuras de vidrio

Acerca del producto: Nombre del producto: herramienta de diamante Procesamiento: diamante electrochapado Granos: puede ser todo tipo de granos, para pulido grueso, pulido fino Tamaño: se puede personalizar Aplicación: vidrio, acrílico La muela abrasiva de diamante electrochapada tiene la ventaja de: pulido de diamante electrochapado La rueda está hecha de diamante como abrasivo por electrodeposición de metal. Las herramientas de diamante electrochapadas tienen partículas de diamante que sobresalen de la superficie, de modo que las ruedas de diamante electrochapadas tienen la máxima...

Disco de corte electrochapado de diamante/CBN

Sobre el producto: los discos de corte galvanizados se utilizan ampliamente para cortar materiales metálicos y no metálicos, como cerámica de alúmina, cerámica de zirconio, cerámica negra, tubos de cerámica, materiales refractarios, forros de freno, vidrio de cuarzo, vitrocerámica, vidrio óptico, alta Tubos de vidrio de silicio de boro, cuentas, gemas, cristales, jade, núcleos magnéticos, chips magnéticos, óxido de hierro, tierras raras, carburo de silicio, oblea de silicio, piedra de aceite, etc. Especialidades y producción personalizada Nuestra rueda diamantada...

Muela abrasiva vitrificada Dimaond para herramientas PCD, PCBN

Acerca del producto: Nombre: muela abrasiva de diamante vitrificado para PCD, cuchillos PCBN, muela abrasiva de diamante cerámico Material Cuerpo de acero, recubierto de diamante, deshuesado de cerámica Forma plana D 150 mm L 100 mm B 36 mm H 24,6 mm A 15 mm capa de trabajo C 6,5 mm Proceso vitrificado unido Características perfectas para afilado de herramientas PCD, PCBN alta calidad alta eficiencia Aplicación PCD, cuchillas PCBN, herramientas Tipo de rectificado Húmedo recomendado Para s...

CENTRO DE CONOCIMIENTO

  • Everything you need to know about grinding wheels

    Grinding Wheels 101: Everything You Need to Know About Sharpening Wheels Welcome to Grinding Wheels 101! In this blog post, we'll discuss everything you need to know about sharpening wheels. We&……

  • Everything you need to know about lapping Paste

    What is lapping paste? Lapping paste is a type of abrasive compound that is used to smooth surfaces by rubbing them together. It is typically used to polish the surfaces of metal parts, such as engi……

  • A Beginner’s Guide to Sharpening Stones

    A Beginner's Guide to Sharpening Stones If you’re just getting started with sharpening stones, you’ve come to the right place! Sharpening stones are an essential tool for sharpening and honing k……