18 Years Factory high-pressure snagging wheel- High quality resin diamond cutting blade for export – Kemei

Diamond cutting is a kind of cutting tool, which is widely used in the processing of hard and brittle materials such as stone, concrete, precast slab, new and old roads, ceramics, etc. diamond cutting blade mainly consists of two parts: matrix and cutter head. Matrix is the main supporting part of binding cutter head, while cutter head is the part that starts cutting in the process of use, and cutter head will be consumed continuously in use, while matrix will not, The reason why the cutting head can play the role of cutting is that it contains diamond. As the most hard material at present, diamond rubs and cuts the processed object in the cutting head, while the diamond particles are wrapped in the inside of the cutting head by metal.
Precautions for use:
1. Please check carefully before installing the cutting sheet. If there is any gap or other damage, please stop using.
2. When the cutting piece is marked with the rotation direction, it shall be consistent with the rotation direction of the machine tool. On the contrary, the cutting is not sharp, so it is difficult to develop the performance of cutting wheel.
3.If any abnormality is found during cutting, stop the machine immediately and check the cause.
4. When the cutting is not sharp, the slice shall be trimmed and cut. If it continues to be used, it will overheat and overload, which may lead to chip breakage.
5. It is forbidden to cut by hand during the rotation of cutting piece, let alone touch sand by hand and body
6.The cutting piece shall not be used for operations other than grooving or cutting to avoid abnormality due to uneven stress.
1. Applicable to the cutting of terrazzo marble.
2. Cutting of cement pavement, hard refractory and non-metallic materials.
3. Slotting the road, bridge and river.
4. The road surface and bridge deck are carved by the road chip.
5. It is widely used in municipal construction, road reconstruction, airport runway construction, concrete pavement and other construction sites, especially suitable for cutting asphalt and concrete pavement joints and other professional cutting operations